The Secure Boot Error Message Prompts During the Restore Process

概要: An Ubuntu 20.04 device with Dell Client Agent - Enabler (DCA Enabler) configured encounters a Secure Boot error message that is displayed while the operating system restore is in process. ...

この記事は次に適用されます： この記事は次には適用されません： この記事は、特定の製品に関連付けられていません。 すべての製品パージョンがこの記事に記載されているわけではありません。
他のリソースを確認する

現象

Affected Products:

  • Most products shipping with Ubuntu 20.04 with DCA Enabler configuration
Note: Observed mostly on products that have an NVIDIA driver

User performs recovery option on the device and the device starts the restore process, then the below message is displayed. The device is stops responding and cannot progress.

Secure Boot error message
Figure 1: (English Only) Error message received during Ubuntu recovery process

原因

This issue is happening because the Dell Recovery Tool detects the device to be a Dell Hybrid Client computer while recovery and during Ubuntu Base operating system install it skips some scripts (relevant to Secure boot pre-apply configuration to backup existing signature keys). Then, it tries to reenable the Secure boot which results in the above dialog being displayed for NVIDIA driver component devices. The workflow should be to install standard Ubuntu for a DCA Enabler.

解決方法

To resolve this:

  1. Once the user is on the above screen, shut the device down, and then power the device back on.
  2. While restarting, disable secure boot manually from the BIOS, save, and exit.
Note:
  • This process varies depending on the device.
  • The device reboots.
  1. Once restarted, the restore process should continue.

対象製品

Dell Hybrid Client
文書のプロパティ
文書番号: 000195379
文書の種類: Solution
最終更新: 30 9月 2024
バージョン:  4
質問に対する他のDellユーザーからの回答を見つける
サポート サービス
お使いのデバイスがサポート サービスの対象かどうかを確認してください。