"No valid method" error in PBA when Self-Encrypting Drive or Hardware Crypto-Accelerator and SmartCard combination

Summary: This article includes information regarding PBA authentication error after the Self-Encrypting Drive or Hardware Crypto-Accelerator and SmartCard has been configured.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

Warning: Dell Data Protection | Hardware Crypto-Accelerator is End of Life for more information, reference End of Life / End of Support policy for Dell Data Security.

Affected Products:

  • Dell Encryption Enterprise Self-Encrypting Drive
  • Dell Data Protection | Self-Encrypting Drive
  • Dell Data Protection | Hardware Crypto-Accelerator

Cause

Not Applicable

Resolution

Self-Encrypting Drive or Hardware Crypto-Accelerator and SmartCard: no valid method error at PBA

After configuring HCA or SED with smart card PBA authentication, the end user cannot authenticate successfully with the following error in the PBA logs:

CredException: User::Authenticate() - invalid method is used (Error code: 0)

Regenerating the domain controller Authentication certificate on the domain controller fixes this issue. This certificate is required for smart card log in authentication.

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

Produse afectate

Dell Encryption
Proprietăți articol
Article Number: 000126129
Article Type: Solution
Ultima modificare: 17 May 2024
Version:  9
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.