VNX/Unity: Cinder driver requires storops with Red Hat OpenStack Platform 10 (User Correctable)

Sammanfattning: OpenStack Cinder Driver for Block requires Storops package for RED HAT 10.

Den här artikeln gäller för Den här artikeln gäller inte för Den här artikeln är inte kopplad till någon specifik produkt. Alla produktversioner identifieras inte i den här artikeln.
Kolla in andra resurser

Symptom

Implementing OpenStack Cinder in RedHat Enterprise 10 Environment.

Using the VNX Cinder Driver with Red Hat OpenStack Platform 10 results in "Failed to initialize driver" errors.

Orsak

With Red Hat OpenStack Platform 10, the Dell EMC storops (https://github.com/emc-openstack/storops) library must be installed on each host utilizing the VNX Cinder Driver. Storops is created and maintained by Dell EMC and is a Python library used to send commands to the VNX system. The storops library is not included in a basic installation of Red Hat OpenStack Platform 10.

Upplösning

Install storops on each OpenStack host that is using the VNX Cinder driver.

Refer to the latest release with the "noarch" package from this location: https://github.com/emc-openstack/storops/releases.
 
Alternatively, the pip package manager may be used (ex. "pip install storops"). See the Dell EMC GitHub page for more details on installing storops: https://github.com/emc-openstack/storops

Ytterligare information

Red Hat is also aware of this new dependency.
Details can be found on Red Hat's support site: https://access.redhat.com/solutions/2888591

 

Berörda produkter

VNX/VNXe

Produkter

Dell EMC Unity Family, VNX/VNXe
Artikelegenskaper
Artikelnummer: 000065199
Artikeltyp: Solution
Senast ändrad: 30 maj 2024
Version:  4
Få svar på dina frågor från andra Dell-användare
Supporttjänster
Kontrollera om din enhet omfattas av supporttjänster.