Dell Networking OS10 How to disable system command

Sammanfattning: This article explains how to disable the use of the "system" command.

Den här artikeln gäller för Den här artikeln gäller inte för Den här artikeln är inte kopplad till någon specifik produkt. Alla produktversioner identifieras inte i den här artikeln.
Kolla in andra resurser

Instruktioner

In Dell Networking OS10, the LINUX system commands can be accessed by using the system command.

By default it is enabled. It can be disabled using system-cli disable.

Command syntax

 
Command  Explanation
OS10# configure terminal  Enter Configure mode
OS10(config)# system-cli disable  Disable system command 
OS10(config)# no system-cli disable  Enable system command
 

Sample Output

When system cli is enabled (Default)
-------------------------------
OS10#
OS10# system bash
admin@OS10:/home/admin$
admin@OS10:/home/admin$ exit
OS10#

Disabling system cli
-----------------------
OS10# 
OS10# configure terminal
OS10(config)# system-cli disable
OS10(config)# exit
OS10#

When system cli is disabled
-------------------------------
OS10# 
OS10# system bash
% Error: Unrecognized command.
OS10#

Be aware that: 
Disabling system-cli does not disable the linuxadmin account.
Use system-user linuxadmin disable to disable it. 
OS10# configure terminal
OS10(config)# system-user linuxadmin disable

The following document includes recommendations for securing switches that run Dell SmartFabric OS10.
Dell SmartFabric OS10 and SmartFabric Services Security Configuration Guide December 2022

Berörda produkter

Dell EMC Networking N3200-ON, PowerSwitch S4112F-ON/S4112T-ON, PowerSwitch S4128F-ON/S4128T-ON, PowerSwitch S4148F-ON/S4148T-ON/S4148FE-ON, PowerSwitch S4148U-ON, PowerSwitch S4248FB-ON /S4248FBL-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON , PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON, PowerScale Switch S4112F, PowerScale Switch S4148F, PowerScale Switch S5232F, PowerScale Switch Z9100, PowerScale Switch Z9264, SmartFabric OS10 Software ...
Artikelegenskaper
Artikelnummer: 000214216
Artikeltyp: How To
Senast ändrad: 02 okt. 2023
Version:  2
Få svar på dina frågor från andra Dell-användare
Supporttjänster
Kontrollera om din enhet omfattas av supporttjänster.