- Notes, Cautions, and Warnings
- Overview
- Installation
and Quick Start
- Information Prerequisites
- Installing Active
System Manager
- Deployment Prerequisites
- Prerequisites for M1000e (with MXL), S5000, and Compellent
- Prerequisites for Rack Server, S5000, and Compellent
- Prerequisites for M1000e (with MXL), S5000, Brocade, and Compellent
- Prerequisites for Rack Server, S5000, Brocade and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, and Compellent
- Prerequisites for Rack Server, Cisco Nexus, and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for Rack Server, Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for M1000e (with MXL and FC FlexIOM), Brocade, and Dell Compellent
- Prerequisites for System Center Virtual Machine Manager (SCVMM)
- Deploying ASM on VMware vSphere
- Deploying ASM using SCVMM
- Deploying ASM on Hyper-V host
- Rectifying mounting errors during Hyper–V deployment
- Configuring ASM Virtual Appliance
- Customizing Virtual Machine Templates for VMware and Hyper-V
- Configuring ASM Virtual Appliance for NetApp Storage Support
- Completing Initial Configuration
- Installing Windows ADK 8.2 for OS Prep for Windows
- Configuring DHCP or PXE on External Servers
Active System Manager Release 8.2 Installation Guide
Rectifying mounting errors during Hyper–V deployment
For HyperV
Cluster deployment, if the cluster configuration fails to mount the
disk and create the cluster storage volume:
Error 01
SCVMM reports DNS error during mounting of the available storage on SCVMM cluster. This is due to intermittent network failure during the mounting operation.
Resolution
Retry the deployment, so that ASM can retry to mount the volume(s).
Error 02
SCVMM reports DNS error during mounting of the available storage on SCVMM cluster . Trying to reuse an existing volume used in another HyperV cluster.
Resolution
HyperV or SCVMM do not allow mounting a volume which is used in another cluster (Active / Inactive). ASM does not format already formatted volume to avoid any data-loss.
In case an existing volume is used for cluster configuration, ASM will fail the cluster deployment to avoid the data-loss. To configure the volume to be used in this cluster below steps needs to be performed.
This volume needs to be formatted manually from one of the server that needs to be added to the cluster.
- RDP to the Server using local administrator account.
- Select Server Manager> Tools> Computer Management> Disk Management
- Select the volume that is failing
- Select Online > Initialize disk (Partition Style MBR)
- Create Simple Volume. Ensure to deselect the drive letter.
- On SCVMM, refresh the host and the cluster
- Retry the deployment from ASM.
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \