- Notes, cautions, and warnings
- Working on your computer
- Technology and components
- Disassembly and reassembly
- Subscriber Identity Module(SIM) board
- SD card—optional
- Base cover
- Battery
- SSD card–optional
- SSD frame
- Hard drive
- Coin-cell battery
- WLAN card
- WWAN card – optional
- Memory modules
- Keyboard lattice and Keyboard
- Heat sink
- System fan
- Power connector port
- Chassis frame
- LED board
- SmartCard module
- Touchpad panel
- System board
- Speaker
- Display hinge cover
- Display assembly
- Display bezel
- Display panel
- Display (eDP) cable
- Camera
- Display hinges
- Display back cover assembly
- Palm rest
- Troubleshooting
- Getting help
Latitude 5491 Service Manual
Removing the battery
- Follow the procedure in Before working inside your computer.
- Remove the base cover.
- To remove the
battery:
- Disconnect the battery cable from the connector on the system board [1] and unroute the cable from the routing channel.
- Loosen the M2x6 captive screw that secures the battery to the system [2].
- Lift the
battery away from the system [3].
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \