Latitude 5491 Service Manual

Installing power connector port

1. Align the power connector port along the grooves on the slot and push it down.
2. Place the metal bracket on the power connector port.
3. Replace the M2x3 screw that secures one end of the power connector bracket to the power connector port.
4. Connect the power connector cable to the connector on the system board.
5. Affix the adhesive tape of the display cable to the power connector bracket and replace the M2x3 screw to secure another end of the power connector bracket.
6. Install the :
   1. battery
   2. base cover
7. Follow the procedure in After working inside your computer.