- Notes, cautions, and warnings
- Working on your computer
- Technology and components
- Disassembly and reassembly
- Subscriber Identity Module(SIM) board
- SD card—optional
- Base cover
- Battery
- SSD card–optional
- SSD frame
- Hard drive
- Coin-cell battery
- WLAN card
- WWAN card – optional
- Memory modules
- Keyboard lattice and Keyboard
- Heat sink
- System fan
- Power connector port
- Chassis frame
- LED board
- SmartCard module
- Touchpad panel
- System board
- Speaker
- Display hinge cover
- Display assembly
- Display bezel
- Display panel
- Display (eDP) cable
- Camera
- Display hinges
- Display back cover assembly
- Palm rest
- Troubleshooting
- Getting help
Latitude 5491 Service Manual
Removing the Subscriber Identification Module card
CAUTION: Removing
the SIM card when the computer is on may cause data loss or damage
the card. Ensure your computer is turned off or the network connections
are disabled.
- Insert a paperclip or a SIM card removal tool into the pinhole on the SIM card tray [1].
- Pull the SIM card tray to remove it [2].
- Remove the SIM card from the SIM card tray.
- Push the SIM card tray into the slot until it clicks
into place.
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \