Dell Command | Configure Version 4.1.0 Command Line Interface Reference Guide

--PeakShiftCfg

Valid Argument	Enabled, Disabled
Description	Enables or disables Peak Shift battery configuration. Using Peak Shift configuration, you can minimize the consumption of AC power during the peak power usage period of the day with the enable and disable options. You can set a start and end time for the Peak Shift period. During this period, the system runs on battery if the battery charge is above the set battery threshold value. After the Peak Shift period, the system runs on AC power without charging the battery. The system functions normally using AC power and recharging the battery after the specified Charge Start Time. NOTE: To use `PeakShiftCfg`, set the values of `Operate only on battery`, `Operate only on AC`, and `Resume normal power/charge`. The values must be set in such a way that Peak shift start time <= Peak shift end time <= Peak shift charge start time. NOTE: The value of hour must be in the range 00–23 and minute must be 00,15, 30, or 45. To set 12 a.m., provide the hour value as 00.
Example	To enable Peak Shift battery configuration: C:\>cctk --PeakShiftCfg=Enabled PeakShiftCfg=Enabled To enable Peak Shift battery configuration on specific days for a specific period: C:\>cctk --PeakShiftCfg=Enabled,mon-10:30/14:00/16:00,tue-10:30/14:00/16:30 To disable Peak Shift battery configuration: C:\>cctk --PeakShiftCfg=Disabled PeakShiftCfg=Disabled