Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Dell PowerEdge T20 Owner's Manual

Installing the system fan

  • CAUTION: Do not operate the system with the cover removed for a duration exceeding 5 minutes.
  • CAUTION: Do not remove or install the system fan by holding the fan blades.
  1. Hold the system fan by the sides with the cable end facing the bottom of the chassis.
  2. Align the four grommets of the system fan with the four grooves on the sides of the system fan.
  3. Pass the grommets through the corresponding grooves on the system fan.
  4. Stretch the grommets and push the system fan towards the chassis till it locks into place.
    • NOTE: Install the two lower grommets first.
  1. Connect the system fan power cable to the system fan connector on the system board.

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\