Μετάβαση στο κύριο περιεχόμενο
Έξοδος

Καλώς ορίσατε στην Dell

Ο λογαριασμός μου
  • Υποβάλετε παραγγελίες γρήγορα και εύκολα
  • Δείτε τις παραγγελίες και παρακολουθήστε την κατάσταση αποστολής
  • Δημιουργήστε μια λίστα με τα προϊόντα σας για να έχετε πρόσβαση σε αυτή
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Είσοδος Δημιουργήστε έναν λογαριασμό Είσοδος στο Premier Είσοδος στο Πρόγραμμα συνεργατών
Επικοινωνία

Active System Manager Release 8.1.1 Installation Guide

PDF

Adding NetApp Ruby SDK to ASM Virtual Appliance

NetApp Manageability SDK files are available to download directly from NetApp. You need a NetApp NOW account to download the SDK.. These files are DfmErrno.rb, NaElement.rb, NaErrno.rb, and NaServer.rb

The NaServer.patch file is available on the ASM appliance at location /etc/puppetlabs/puppet/modules/netapp/files/NaServer.patch You will need the above files to proceed further. Contact your administrator for any additional patch files, or updates.

  1. Log in to the ASM Appliance.

  2. Download and copy the NetApp SDK Ruby lib files to the ASM Appliance /tmp/*.

  3. Copy these Ruby libs files from /tmp to /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp

    # sudo cp /tmp/*.rb /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp

  4. Copy any patch file(s) to the ASM Appliance /tmp directory, currently there is NaServer.patch

    # sudo cp /etc/puppetlabs/puppet/modules/netapp/files/NaServer.patch /tmp

  5. Apply the patch(es) to update the NetApp SDK Ruby files.

    # sudo patch /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/NaServer.rb </tmp/NaServer.patch

  6. Update the permissions on the NetApp module. To update the permissions, run the following command:

    # sudo chmod 755 /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/*

  7. Change the owner of the files. To change the owner of the files, run the following command:

    # sudo chown pe-puppet:pe-puppet /etc/puppetlabs/puppet/modules/netapp/lib/puppet/util/network_device/netapp/*

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\