Dell Update Packages Version 14.11.201 User's Guide

PDF

Installation Order of DUPs

If you are installing multiple DUPs, install the updates that require a reboot at the end. For recommended installation order see the following table.

Table 1. Update Packages: Recommended Installation Order
Installation Order	System Software Components
1	Device driver
2	Device firmware
3	ESM firmware
4	LifeCycle Controller
5	BIOS

NOTE: If you have updated the BIOS, power supply firmware, PERC firmware, PCIeSSD firmware, Mellanox, Emulex firmware and driver, chipset and video drivers, Intel, QLogic and Broadcom firmware the changes to the components take effect only after you reboot the system. On 13G systems, the SAS expander firmware does not require a reboot.

NOTE: For a single reboot, install the ESM firmware update before the BIOS update.

NOTE: On 13G systems, the iDRAC and Lifecycle Controller has common DUP update.