Table 1. System Configuration .
The following table describes the system configuration:
Option
Description
Integrated NIC
Allows you to configure the on-board LAN controller.
Disabled
= The internal LAN is off and not visible to the operating system.
Enabled = The internal LAN is enabled.
Enabled w/PXE
= The internal LAN is enabled (with PXE boot) (selected by default)
SATA Operation
Allows you to configure the operating mode of the
integrated hard drive controller.
Disabled
= The SATA controllers are hidden
AHCI = SATA is configured for AHCI mode
RAID ON
= SATA is configured to support RAID mode (selected by default)
Drives
Allows you to enable or disable the various drives
on-board:
SATA-0 (enabled
by default)
SATA-1 (enabled
by default)
SATA-2 (enabled
by default)
M.2 PCIe
SSD-0 (enabled by default)
Smart Reporting
This field controls whether hard drive errors
for integrated drives are reported during system startup. The
Enable Smart Reporting option is disabled by default.
USB Configuration
Allows you to enable or disable the integrated
USB controller for:
Enable USB Boot
Support
Enable External USB Port
All the options are enabled by default.
Audio
Allows you to enable or disable the integrated
audio controller. The option
Enable Audio is
selected by default.
Enable Microphone
Enable Internal
Speaker
Both the options are selected by default.
Miscellaneous Devices
Allows you to enable or disable the following
devices:
Enable
Camera (enabled by default)
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\