Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Dell Edge Gateway 3003 Installation and Operation Manual

PDF

Attaching the cable control bars to the standard-mount bracket

  1. Mount the Edge Gateway on the wall using the standard-mount bracket or quick-mount bracket.
  2. Place the cable control bar on the mounting bracket and secure it to the notch.
    CAUTION: Use the top cable control bar only with coaxial cable connections. Do not use with antennas.
    Image: Place the cable control bar on the mounting bracket and secure it to the notch
  3. Align the screw holes on the cable control bar with the screw holes on the mounting bracket.
  4. Tighten the six M3x3.5 mm screws that secure the cable control bar to the mounting bracket.
    NOTE: Torque the screws at 5±0.5 kilograms-centimeter (11.02±1.1 pounds-inch).
    Image: Tighten the six screws that secure the cable control bar to the standard-mounting bracket
  5. Connect the cables to the Edge Gateway.
  6. Loop the cable lock (not supplied) to secure each cable to the cable control bar.
    Image: Loop the cable lock to secure each cable to the cable control bar

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\