- Notes, cautions, and warnings
- Overview
- System views
- Installing your Edge Gateway
- Safety and regulatory information
- Setting up your Edge Gateway
- Activating your mobile broadband service
- Mounting your Edge Gateway
- Mounting the Edge Gateway using the standard-mount bracket
- Mounting the Edge Gateway using quick-mount bracket
- Attaching the cable control bars to the standard-mount bracket
- Mounting the Edge Gateway on a DIN rail using the DIN-rail bracket
- Mounting the Edge Gateway using the perpendicular mount
- Mounting the Edge Gateway using a VESA mount
- Setting up the ZigBee dongle
- Setting up the operating system
- Windows 10 IoT Enterprise LTSB 2016
- Ubuntu Core 16
- Overview
- Boot up and log in – Direct system configuration
- Boot up and log in – Static IP system configuration
- Updating operating system and applications
- Additional Ubuntu commands
- Ubuntu Network Manager
- Security
- Watchdog Timer (WDT)
- Cloud LED On/Off
- Global Positioning Systems (GPS)
- Snappy auto update/Autopilot
- Accessing Snappy Store/Snapweb
- Sensors
- Ignition Pin
- System Power Management
- Restoring Ubuntu Core 16
- Flashing a new OS image
- Ubuntu Server
- Overview
- Login to the Edge Gateway using Ethernet Port 1
- Installing or configuring Dynamic Host Configuration Protocol (DHCP) daemon
- Login to the Edge Gateway using Ethernet Port 2
- Ubuntu Server driver information
- Firmware management on Ubuntu Server
- Configure Watchdog Timer (WDT)
- Trusted Platform Module (TPM)
- Cloud LED On/Off
- Advanced Linux Sound Architecture (ALSA)
- Global Positioning Systems (GPS)
- Sensors
- Ignition Pin
- System Power Management
- Ubuntu Network Manager
- Restoring Ubuntu Server
- Creating the recovery USB flash drive
- Accessing and updating BIOS
- References
- Appendix
- Contacting Dell
Dell Edge Gateway 3003 Installation and Operation Manual
Top view
| Features | ||
|---|---|---|
| 1 | WLAN, Bluetooth, or GPS connector | Connect the antenna to increase the range and strength of wireless, Bluetooth, or satellite signals. |
| 2 | Mobile broadband antenna-connector one (3G/LTE) | Connect the mobile broadband antenna to increase the range and strength of mobile broadband signals. |
| 3 | ZigBee antenna connector | Connect the ZigBee antenna for intermittent data transmissions from a ZigBee-compliant sensor or input device. |
| 4 | Mobile broadband antenna-connector two (LTE Auxiliary only) | Connect the mobile broadband antenna to increase the range and strength of mobile broadband signals. |
NOTE: Depending
on the configuration ordered, some of the antenna connectors may not
be present or may be capped. For more information about connecting
antennas to the Edge Gateway, see the documentation that is shipped
with the antenna. Antennas are available in the accessory box shipped with the Edge Gateway.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\