Dell Edge Gateway 3003 Installation and Operation Manual

Activating your mobile broadband service

1. Remove the screw to open the micro-SIM card access door.
2. Insert a micro-SIM card into the top micro-SIM card slot.
   
3. Replace the screw, and close the micro-SIM card access door.
4. Power on the Edge Gateway.
5. Connect to a mobile network.
   Windows operating system

   1. Click the network icon from the taskbar, and then click Cellular.
   2. Select Mobile Broadband Carrier > Advanced Options.
   3. Make a note of the International Mobile Equipment Identity (IMEI) and Integrated Circuit Card Identifier (ICCID).
   4. Enter your APN number and any other credentials that your service provider requires.
   Ubuntu operating system

   1. Open the Terminal window.
   2. Enter $sudo su - to access super user mode.
   3. Configure the Mobile Broadband connection profile:

      Command line:

      network-manager.nmcli con add type <type> ifname <ifname> con-name <connection-name> apn <apn>

      Example (Verizon):

      network-manager.nmcli con add type gsm ifname cdc-wdm0 con-name VZ_GSMDEMO apn vzwinternet

      Example (AT&T):

      network-manager.nmcli con add type gsm ifname cdc-wdm0 con-name ATT_GSMDEMO apn broadband

      Example (3G):

      network-manager.nmcli con add type gsm ifname cdc-wdm0 con-name 3G_GSMDEMO apn internet

   4. Connect to the mobile network:

      Command line:

      network-manager.nmcli con up <connection-name>

      Example (Verizon):

      network-manager.nmcli con up VZ_GSMDEMO

      Example (AT&T):

      network-manager.nmcli con up ATT_GSMDEMO

      Example (3G):

      network-manager.nmcli con up 3G_GSMDEMO

   To disconnect from the mobile network:

   Command line: network-manager.nmcli con down <connection-name>

   Example (Verizon):

   network-manager.nmcli con down VZ_GSMDEMO

   Example (AT&T):

   network-manager.nmcli con down ATT_GSMDEMO

   Example (3G):

   network-manager.nmcli con down 3G_GSMDEMO