Dell Edge Gateway 3003 Installation and Operation Manual

Option 2: Restoring during system POST

CAUTION: These steps delete all the data on your Edge Gateway.

Connect a USB keyboard to the Edge Gateway.
Power on the Edge Gateway.
The Power LED turns solid green while the Cloud LED is off.
During the first 20 seconds after applying power, press Ctrl+F repeatedly to trigger the operating system recovery.

When the Cloud LED starts blinking green, continue with one of these options:

NOTE: If the Cloud LED does not start blinking after 50 seconds, power off the Edge Gateway and repeat Steps 2 and 3.

Table 1. Start or cancel restoration during system POSTProvides options to start or cancel restoration.
To start restoration	To cancel restoration
Press `y`, then press `Enter`. The Cloud LED changes to solid green indicating that recovery is in progress. Once restoration is complete, the Cloud LED turns off and the system reboots. The restoration takes about 2 minutes to complete.	Press `n`, then press `Enter`. Or, if the system does not detect any key-press within 30 seconds. The Cloud LED turns off, and the system reboots.