Dell OptiPlex 7440 All-In-One Owner's Manual

Removing the processor

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. stand
   2. back cover
   3. cable cover
   4. speaker cover
   5. speaker
   6. VESA mount bracket
   7. system board shield
   8. SSD card
   9. WLAN card
   10. memory
   11. heat sink
   12. system fan
3. To remove the processor:
   1. Release the socket lever by pushing the lever down and out from under the tab on the processor shield [1].
   2. Lift the lever upward and lift the processor shield [2].
      CAUTION The processor socket pins are fragile and can be permanently damaged. Be careful not to bend the pins in the processor socket when removing the processor out of the socket.
   3. Lift the processor out of the socket [3].
      NOTE After removing the processor, place it in an antistatic container for reuse, return, or temporary storage. Do not touch the bottom of the processor to avoid damage to the processor contacts. Touch only the side edges of the processor.