Dell EMC OpenManage Enterprise Version 3.3.1 User's Guide

Edit a firmware catalog

1. On the Catalog Management page, select the check box corresponding to the catalog.
   The firmware catalog details are displayed in the <catalog name> right pane.
2. Click Edit in the right pane.
3. In the Edit Firmware Catalog dialog box, edit the properties.
   The properties that you cannot edit are grayed-out. For field definitions, see Create a firmware catalog by using Dell.com and Add a catalog to the local network.
4. Enter the Share Address and the Catalog File Path, the Test now link is displayed. To validate a connection to the catalog click Test now. If the connection to the catalog is established, a Connection SuccessfulConnection Successful message is displayed. If connection to the share address or the catalog file path is not established, Connection to path failedConnection to path failed error message is displayed. This is an optional step.
5. In the Update Catalog box, select either Manually or Automatically.
   If the Update Catalog is selected as Automatically, select either Daily or Weekly as the update frequency and enter time in the 12-hour format.
6. Click Finish.
   A job is created and run immediately. The job status is indicated in the REPOSITORY LOCATION column of the Catalog Management page.