Dell EMC OpenManage Enterprise Version 3.3.1 User's Guide

Performing more actions on chassis and servers

By using the More Actions drop-down menu, you can perform the following actions on the All Devices page. Select the device(s) and click any one of the following:

• Turn LED On: Turn on the LED of the device to identify the device among a group of devices in a data center.
• Turn LED Off: Turn off the LED of the device.
• Power On: Turn on the device(s).
• Power Off: Turn off the device (s).
• Graceful Shutdown: Click to shut down the target system.
• Power Cycle System (Cold Boot): Click to power off and then restart the system.
• System Reset (Warm Boot): Click to shut down and then reboot the operating system by forcefully turning off the target system.
• Proxied: Displayed only for the MX7000 chassis. Indicates that the device is discovered through an MX7000 lead chassis in case of Multi-Chassis Management (MCM).
• IPMI CLI: Click to run an IMPI command. See Create a Remote command job for managing devices.
• RACADM CLI: Click to run a RACADM command. See Create a Remote command job for managing devices.
• Update Firmware: See Upgrade or downgrade device firmware by using the firmware baseline.
• Onboarding: See Onboarding devices.
• Export All and Exported Selected: See Export all or selected data.