Installing the processor
- Align the processor with the socket keys.
CAUTION: Do not use force to seat the processor. When the processor is positioned correctly, it engages easily into the socket.
- Align the pin-1 indicator of the processor with the triangle on the socket.
- Place the processor on the socket such that the slots on the processor align with the socket keys.
- Close the processor shield by sliding it under the retention screw.
- Lower the socket lever and push it under the tab to lock it.
- Install the:
- heat sink assembly
- optical drive
- cooling shroud
- 2.5 hard drive assembly
- front bezel
- cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic