Dell OptiPlex 5055 Small Form Factor Owner's Manual

Removing the VGA daughter board

1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
   1. Back Cover
   2. Bezel
3. Open the Front Bezel Door
4. To remove the VGA daughter board:
   1. Remove the screws that secure the VGA connector to the computer [1].
   2. Slide the VGA connector to release it from the computer [2].
   3. Remove the screw that secures the VGA daughter board to the computer [3].
   4. Lift the VGA daughter board using the handle to remove it from the computer [4].