Installing the intrusion switch
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the intrusion switch and provides a visual representation of the installation procedure.
![This image display the installation of intrusion switch](https://dl.dell.com/content/guides/public/html//opti5090mt_sm/images/GUID-50F00D50-1F4B-4DD6-AC77-9155F449F44D-low.jpg)
Steps
- Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
- Connect the intruder cable to the connector on the system board.
Data is not available for the Topic