Installing the powered GPU
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the powered graphical processing unit and provide a visual representation of the installation procedure.
Steps
- Lift the pull tab to open the PCIe door.
- Align the powered GPU with the PCI-Express card connector on the system board.
- Using the alignment post, connect the powered GPU in the connector and press down firmly. Ensure that the powered GPU is firmly seated.
- Connect the power cable to the connector on the powered GPU.
- Close the PCIe door.
Data is not available for the Topic