Removing the 2.5-inch hard-disk drive bracket
About this task
The following images indicate the location of the hard-disk drive bracket and provide a visual representation of the removal procedure.
![This image displays teh removal of 2.5-inch hard drive from the hard drive bracket](https://dl.dell.com/content/guides/public/html//opti5090mt_sm/images/GUID-2825AAF5-E5A2-4763-88CC-751C12BF5FEE-low.jpg)
Steps
- Pull one side of the hard-disk drive bracket to disengage the pins on the bracket from the slots on the drive.
- Lift the hard-disk drive out of the bracket.
NOTE The orientation or the SATA connector marking on the hard-disk drive so that you can replace it correctly.
Data is not available for the Topic