Installing the graphics card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the graphics card and provide a visual representation of the installation procedure.
![Installing the graphics card](https://dl.dell.com/content/guides/public/html//opti5090mt_sm/images/GUID-70DCF9D7-CF2F-4F8A-A263-B9441ED860EA-low.jpg)
Steps
- Align the graphics card with the PCI-Express card connector on the system board.
- Using the alignment post, connect the graphics card in the connector and press down firmly. Ensure that the card is firmly seated.
- Lift the pull tab to close the PCIe door.
Data is not available for the Topic