Using the Power CLI
To install the iSM using Power CLI:
-
Install the supported PowerCLI of ESXi on the supported Microsoft Windows operating system.
-
Copy the
ISM-Dell-Web-4.1.0.0-<bldno>.VIB-<version>i-Live.zip file to the ESXi host.
-
Navigate to the bin directory.
-
Run Connect-VIServer and provide the server and other credentials.
-
Log on to the ESXi host using supported vSphere CLI of ESXi 6.x U3, or ESXi 7.x and create a datastore.
-
Create a folder
ISM-Dell-Web-4.1.0.0-<bldno>.VIB-<version>I on ESXi 6.x U3, or ESXi 7.x host under
/vmfs/volumes/<datastore_name> directory.
-
Copy the ESXi ZIP file on ESXi 6.x U3, or ESXi 7.x host to
/vmfs/volumes/<datastore_name>ISM-Dell-Web-4.1.0.0-<bldno>.VIB-<version>I
directory.
-
Unzip the ZIP file in the above specified directory.
-
Run the following command in Power CLI:
For ESXi 7.x:
Install-VMHostPatch -VMHost <VMHost I.P address> - HostPath /vmfs/volumes/<datastore_name>name>/ISM-Dell-Web-4.1.0.0-<bldno>.VIB-<version>i/metadata.zip
For ESXi 6.x:
Install-VMHostPatch -VMHost <VMHost I.P address> - HostPath /vmfs/volumes/<datastore_name>name>/ISM-Dell-Web-4.1.0.0-<bldno>.VIB-<version>i/metadata.zip
-
Run the following command to verify if the iSM is installed successfully on the host:
For ESXi 7.x:
esxcli software component get -n DEL-dcism.
For ESXi 6.x:
esxcli software vib get -n dcism.
iSM is displayed.
-
Reboot the host operating system after installing iSM using the above Power CLI command.
For more information on Power CLI, see the VMware website.
Data is not available for the Topic