Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

feature

Description

Displays all active chassis features. The information displayed includes feature name, date activated, and the serial number of the SD card used to activate the feature.

Dell Feature Cards may contain more than one feature.

NOTE: To use this subcommand to deactivate FlexAddress or ExtendedStorage, you must have the Chassis Configuration Administrator privilege. A user with login privileges can view status only.

NOTE: To deactivate FlexAddress features, the chassis must be turned off.

Synopsis

racadm feature -s
racadm feature -d -c < featurename>
racadm feature -r -c ExtendedStorage

Input

-s — Displays the status of active features.
-d — Deactivates the feature specified in -c option.

NOTE: When the FlexAddress and FlexAddressPlus features are active, deactivating one of them results in deactivation of the other feature also. However, ExtendedStorage is not affected by the deactivation of FlexAddress or FlexAddresPlus.

-r — Repair damaged/unformatted ExtendedStorage media.

NOTE: The –r switch requires that the ExtendedStorage feature be deactivated.

CAUTION: Using the -r switch reformats the SD media in the CMC cardslot. Any existing ExtendedStorage data will be lost.

-c — < featurename> must be one of the following:
flexaddress (with -d)
flexaddressplus (with -d) ExtendedStorage (with -d or -r)

Welcome

Welcome to Dell

Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

feature

Rate this content