Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Sets the name or location of the chassis.

To use this subcommand, you must have the Administrator privilege.

Synopsis

racadm setsysinfo [-c chassisname|chassislocation] <
                                                string>
                                             

Input

• < string > — Indicates a maximum of 64 non-extended ASCII chassis name or location.
• -c — Sets the chassis name or location.

Example

racadm setsysinfo -c chassisname "Dell Rack System"

The chassis name was set successfully.