Dell Chassis Management Controller Version 1.3 for PowerEdge FX2/FX2s RACADM Command Line Reference Guide

Description

Displays the contents of the network interface table.

To use this subcommand, you must have the Administrator privilege.

Synopsis

racadm ifconfig

Example

$ racadm ifconfig

eth0     Link encap:Ethernet  HWaddr 00:1D:09:FF:DA:23

	          inet addr:192.168.0.1  Bcast:192.168.0.120
                                                Mask:255.255.255.0
                                             

	          UP BROADCAST RUNNING MULTICAST  MTU:1500 
                                                Metric:1
                                             

	          RX packets:2550665 errors:0 dropped:0 overruns:0
                                                frame:0
                                             

	          TX packets:0 errors:0 dropped:0 overruns:0
                                                carrier:0
                                             

	          collisions:0 txqueuelen:1000

	          RX bytes:272532097 (259.9 MiB)  TX bytes:0
                                                (0.0 B)