Dell Vostro 5471 Owners's Manual

Installing the system board

1. Align the screw holes on the system board with the screw holes on the system.
2. Replace the three M2.0 x 2 screws to secure the system board to the computer.
3. Align the screw holes of the USB Type C bracket with the screw holes on the system board and replace the two screws to secure the bracket to the system.
4. Connect the eDP cable, power adapter port cable and speaker cable to the connector in the system board.
5. Connect the Input output board cable, speaker cable, keyboard backlight cable, keyboard cable and touchpad cable to the system board.
6. Install the:
   1. solid state drive(SSD)
   2. heat sink
   3. system fan
   4. battery
   5. base cover
7. Follow the procedure in After working inside your computer.