Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

PDF

assignva

Table 1. Details of assignva. The following table provides the details of assignva attribute:
Description Assigns a virtual disk to one or more virtual adapters.
  • NOTE: You can assign virtual disk to multiple virtual adapters when you select the mode of assignment as multiple.
  • NOTE: You can assign a virtual disk to multiple virtual adapters from CMC CLI even when the Assignment Mode is set to Single Assignment in the CMC web interface.
Synopsis 
racadm raid assignva:<VA FQDD> -vdkey:<VD FQDD> -accesspolicy {na | rw} -assignpolicy {single | multiple}{-current | -pending}
Input
  • –current <optional>: Performs the configuration right now.
    • NOTE: If this requires the system to reboot, the system reboots then.
  • –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system restarts.
  • –assignpolicy {single|multiple}: Uses the specified assign policy to determine if the virtual disk can be assigned to multiple virtual adapters.
    • NOTE: Enable cluster services on the servers when assigning virtual disk to multiple virtual adapters. Use of this mode without Cluster Services may lead to corrupted or lost data.
  • –accesspolicy {na | rw}: Set the access policy to No Access or Read/Write.
  • –vdkey:<VD FQDD>: The virtual drive to change the access to.
Example 
racadm raid assignva:RAID.ChassisIntegrated.1-1-1 -vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -accesspolicy { na | rw
                                                }
                                             
racadm raid assignva:RAID.ChassisIntegrated.1-1-2 -vdkey:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -accesspolicy rw -assignpolicy
                                                multiple

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\