Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

Description

Displays power management status information.

To use this subcommand, you must have CMC Login User privilege.

Synopsis

racadm getpminfo

Example

racadm getpminfo

[Real-Time Power Statistics]
                                                System Input Power              = 600 W (188 BTU/hr)
                                                Peak System Power               = 600 W (188 BTU/hr
                                                Peak System Power Start Time    = 16:02:10 01/16/2008
                                                Peak System Power Timestamp     = 06:32:55 01/26/2009
                                                Minimum System Power            = 400 W (177 BTU/hr)
                                                Minimum System Power Start Time = 22:43:21 01/21/2008
                                                Minimum System Power Timestamp  = 06:32:55 01/26/2009
                                                System Idle Power               = 68 W (188 BTU/hr)
                                                System Potential Power          = 68 W (188 BTU/hr)
                                                System Input Current Reading    = 31.2 A
                                                
                                                [Real-Time Energy Statistics]
                                                System Energy Consumption               = 6.4 kWh
                                                System Energy Consumption Start Time    = 16:02:10 01/16/2008
                                                System Energy Consumption Timestamp     = 16:02:10 01/16/2008
                                                
                                                [System Power Status]
                                                Chassis Power State                    = ON
                                                Overall Power Health = OK
                                                Redundancy = No
                                             

[System Power Policy Configuration]
                                                System Input Power Cap                   = 7928 W (7928 BTU/hr |
                                                10%)
                                                Surplus for Peak Performance            = 7000 W (6130 BTU/hr)
                                                Redundancy Policy                      = None
                                                Dynamic PSU Engagement Enabled         = No
                                             

[Power Budgeting]
                                                System Input Max Power Capacity                 = 0 W
                                                Input Redundancy Reserve                        = 0 W
                                                Input Power Allocated to Servers                = 0 W
                                                Input Power Allocated to Chassis Infrastructure = 51W
                                                Total Input Power Available for Allocation = 0 W
                                                Standby Input Power Capacity                    = 0 W