Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Alienware Area-51m Service Manual

PDF

Procedure

  1. Align the screw holes on the computer base with the screw holes on the palm-rest assembly.
  2. Replace the screw (M2.5x12) that secures the computer base to the palm-rest assembly.
  3. Replace the 14 screws (M2.5x8) that secure the computer base to the palm-rest assembly.Image: Replacing the computer base
  4. Adhere the display cable and camera cable to the computer base.
  5. Connect the camera cable to the system board.
  6. Connect the display cable to the system board.
  7. Align the screw hole on the display-cable bracket with the screw hole on the system board.
  8. Replace the screw (M2x3) that secures the display-cable bracket to the system board.
  9. Adhere the tobii cable to the computer base.
  10. Route the antennas cable through the routing guides on the computer base.
  11. Connect the tobii cable to the system board.
  12. Route the hard-drive cable through routing guides on the computer base.
  13. Connect the hard-drive cable to the system board.Image: Connecting the cables to the system board.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\