Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Alienware m17 R2 Service Manual

PDF

Removing the keyboard

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the 2230 solid-state drive. (if applicable)
  4. Remove the 2280 solid-state drive. (if applicable)
  5. Remove the rear I/O-cover.
  6. Remove the battery.
  7. Remove the coin-cell battery.
  8. Remove the left I/O-board.
  9. Remove the right I/O-board.
  10. Remove the system board.
  11. Remove the power-button assembly.

About this task

The following image indicates the location of the keyboard and provides a visual representation of the removal procedure.

Image: Removing the keyboard

Steps

  1. Remove the two (M2x1.9) screws that secure the keyboard-backlight cable to the keyboard-controller board.
  2. Disconnect the keyboard-backlight cable from the keyboard-controller board.
  3. Lift the latch and disconnect the keyboard cable from the keyboard-controller board.
  4. Remove the 14 (M1.2x2.1) screws that secure the keyboard bracket to the keyboard.
  5. Lift the keyboard bracket off the keyboard.
  6. Remove the 39 (M1.2x1.6) screws that secure the keyboard to the palm-rest assembly.
  7. Lift the keyboard off the palm-rest assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\