Dell Command | Update Version 3.1 User's Guide

PDF

Command line interface Error codes

Table 1. Following are the generic application return codes: Following are the generic application return codes:
Return\Error Codes	Description	Resolution
0	Command execution was successful	NA
1	A reboot was required from the execution of an operation	Reboot the system to complete the operation.
2	An unknown application error has occurred	NA
3	The current system manufacturer is not Dell	Dell Command \| Update can only be run on Dell systems.
4	The CLI was not launched with administrative privilege	Invoke the Dell Command \| Update CLI with administrative privileges.
5	A reboot was pending from a previous operation	Reboot the system to complete the operation.
6	Another instance of the same application (UI or CLI) is already running.	Close any running instance of Dell Command \| Update UI or CLI and retry the operation.
7	The application does not support the current system model	Contact your administrator if the current system model in not supported by the catalog.
8	No update filters have been applied or configured	Supply at least one update filter.

Table 2. The following return codes may appear while evaluating various input validation: The following return codes may appear while evaluating various input validation:
Return\Error Codes	Description	Resolution
100	While evaluating the command line parameters, no parameters were detected	A command must be specified on the command line.
101	While evaluating the command line parameters, no commands were detected	Provide a valid command and options. Refer Command line interface reference section, for more information.
102	While evaluating the command line parameters, invalid commands were detected	Provide a command along with the supported options for that command. Refer Command line interface reference section, for more information.
103	While evaluating the command line parameters, duplicate commands were detected	Remove any duplicate commands and re-run the command. Refer Command line interface reference section, for more information.
104	While evaluating the command line parameters, the command syntax was incorrect	Make sure to follow the command syntax '/<command name>'. Refer Command line interface reference section, for more information.
105	While evaluating the command line parameters, the option syntax was incorrect	Make sure to follow the option syntax '-<option name>'. Refer Command line interface reference section, for more information.
106	While evaluating the command line parameters, invalid options were detected	Make sure to provide all required or only supported options. Refer Command line interface reference section, for more information.
107	While evaluating the command line parameters, the value(s) provided to the specific option was invalid	Provide an acceptable value. Refer Command line interface reference section, for more information.
108	While evaluating the command line parameters, all mandatory options were not detected	If an command requires mandatory options to execute, please provide them. Refer Command line interface reference section, for more information.
109	While evaluating the command line parameters, invalid combination of options were detected	Remove any mutually exclusive options and rerun the command. Refer Command line interface reference section, for more information.
110	While evaluating the command line parameters, multiple commands were detected	With the exception of /help and /version, only one command can be specified in the command line.
111	While evaluating the command line parameters, duplicate options were detected	Remove any duplicate options and re-run the command. Refer Command line interface reference section, for more information.
112	Invalid catalog was detected	Make sure the file path provided exists, had a valid extension type, is a valid SMB, UNC or URL, does not have invalid characters, does not exceed 255 characters and have required permissions. Refer Command line interface reference section, for more information.

Table 3. The following return codes may appear while running the /scan command: The following return codes may appear while running the /scan command:
Return\Error Codes	Description	Resolution
500	No updates were found for the system when a scan operation was executed	The system is upto date or no updates were found for the provided filters. Modify the filters and re-run the commands.
501	An error occurred while determining the available updates for the system, when a scan operation was executed	Retry the operation.
502	The cancellation was initiated, Hence, the scan operation is cancelled	Retry the operation.
503	An error occurred while downloading a file during the scan operation	Check your network connection, make sure there is internet connectivity and Retry the command.

Table 4. The following return codes may appear while running the /applyUpdates command: The following return codes may appear while running the /applyUpdates command:
Return\Error Codes	Description	Resolution
1000	An error occurred when retrieving the result of the apply updates operation	Retry the operation.
1001	The cancellation was initiated, Hence, the Apply updates operation is canceled	Retry the operation.
1002	An error occurred while downloading a file during the apply updates operation	Check your network connection, make sure there is internet connectivity and Retry the command.

Table 5. The following return codes may appear while running the /configure command: The following return codes may appear while running the /configure command:
Return\Error Codes	Description	Resolution
1500	An error occurred while exporting the application settings	Verify the folder exists or have permissions to write to the folder.

Table 6. The following return codes may appear while running the /driverInstall command: The following return codes may appear while running the /driverInstall command:
Return\Error Codes	Description	Resolution

2000	An error occurred when retrieving the result of the Advanced Driver Restore operation	Retry the operation.
2001	The Advanced Driver Restore process failed	Retry the operation.
2002	Multiple diver cab's were provided for Advanced Driver Restore operation	Make sure to provide only one driver cab file.
2003	An invalid path for the driver cab was provided as in input for the driver install command	Make sure the file path provided exists, had a valid extension type, is a valid SMB, UNC or URL, does not have invalid characters, does not exceed 255 characters and have required permissions. Refer Command line interface reference section, for more information.
2004	The cancellation was initiated, Hence, the driver install operation is cancelled	Retry the operation.
2005	An error occurred while downloading a file during the driver install operation	Check your network connection, make sure there is internet connectivity and Retry the command.

Table 7. The following return codes may appear while evaluating the inputs for password encryption: The following return codes may appear while evaluating the inputs for password encryption:
Return\Error Codes	Description	Resolution
2500	An error occurred while encrypting the password during the generate encrypted password operation	Retry the operation.
2501	An error occured while encrypting the password with the encryption key provided	Provide a valid encryption key and Retry the operation. Refer Command line interface reference section, for more information.
2502	The encrypted password provided does not match the current encryption method	The provided encrypted password used an older encryption method, please re-encrypt the password.

Table 8. The following return codes may appear if there are issues with the Dell Client Management Service: The following return codes may appear if there are issues with the Dell Client Management Service:
Return\Error Codes	Description	Resolution
3000	The Dell Client Management Service is not running	Start the Dell Client Management Service in the Windows services if stopped.
3001	The Dell Client Management Service is not installed	Download and install the Dell Client Management Service from the Dell support site.
3002	The Dell Client Management Service is disabled	Enable the Dell Client Management Service from Windows services if disabled.