- Notes, cautions, and warnings
- Preface
- Introduction
- Getting Started
- Configuring and Managing Storage and Applications
- Configuring and Managing Multiple Network Links for CyberSense
- Configuring and Managing Policies and Copies
- Managing Reports
- Monitoring
- Performing a NetWorker Recovery with Cyber Recovery
- Performing an Avamar Recovery with Cyber Recovery
- Recovering Avamar data
- Preparing the production-side Avamar system
- Checklist for Cyber Recovery with Avamar
- Creating the Avamar DD Boost account and UID for Cyber Recovery
- Initiating an Avamar recovery in the Cyber Recovery UI
- Performing manual steps for Avamar recovery
- Cleaning up after an Avamar recovery
- Performing a PowerProtect Data Manager Recovery with Cyber Recovery
- Recovering PowerProtect Data Manager data
- Meeting prerequisites for a PowerProtect Data Manager recovery
- Initiating a PowerProtect Data Manager recovery in the Cyber Recovery UI
- Running a PowerProtect Data Manager recovery check
- Cleaning up after a PowerProtect Data Manager recovery
- Performing postrecovery steps for a PowerProtect Data Manager recovery
- Administration
- Administration overview
- Manually securing and releasing the Cyber Recovery vault
- Managing users
- Managing login sessions
- Setting up an email server
- Managing Cyber Recovery password expiration
- Resetting Cyber Recovery passwords
- Resetting the IP address on the management host
- Changing the network gateway on the Cyber Recovery server
- Updating the SSL security certificate
- Configuring a daily activity report
- Configuring a telemetry report
- Changing time zones
- Changing the log level
- Collecting logs for upload to support
- Log file rotation
- Protecting the Cyber Recovery configuration
- Retrieving your preserved Cyber Recovery configuration
- Setting up a maintenance schedule
- Cyber Recovery disaster recovery
- Troubleshooting
Dell PowerProtect Cyber Recovery 19.13 Product Guide
Configuring a daily activity report
As a security officer, set up a daily Cyber Recovery activity report.
Prerequisites
- You must be logged in as a security officer.
- You have a valid email address.
- The mail server is enabled. For more information, see Setting up an email server.
NOTE:The
Cyber Recovery software can generate and send an activity report without user authentication settings for an external mail server. However, we recommend that you include authentication settings for an external mail server.
About this task
The activity report provides information for all Cyber Recovery jobs for the duration of the configured frequency. Only the crso receives the report.
Steps
- From the Masthead Navigation in the
Cyber Recovery UI, click
to access the
System Settings list.
- Click System Reports
- In the System Reports dialog box, click the Activity Report tab and swipe right on the slider to enable the option.
- Complete the
Frequency and
Next Run fields, and then click
Save.
NOTE:The Cyber Recovery UI uses the same time zone as the Cyber Recovery management host for the scheduled time.The maximum number of days is 31 and the minimum number of hours is 1.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\