Dell Endpoint Security Suite Enterprise Advanced Installation Guide v3.8

• Consider reviewing Client Firewall and Web Protection Requirements before installing.
• NOTE:If your organization requires the use of third-party credential providers, the Encryption Management Agent must be installed or upgraded with the FEATURE=BLM or FEATURE=BASIC parameter.

  NOTE:The Encryption Management Agent must be installed before installing Client Firewall and Web Protection.

  NOTE:Output directories must exist before running the commands below.

• The installers must be run in a specific order. Failure to install the components in the proper order results in installation failure. Run the installers in the descending order in Command Line Installation.

  Child installer commands must be run from their extracted directories or failure will occur.

Command Line Installation

• The following table details the parameters available for the EnsMgmtSdkInstaller.exe file.

  Parameters	Description
  LoadCert	Load the certificate at the specified directory.
  InstallSDK	Installs the SDK at the specified location.
  RemoveRightClick	Removes the right-click menu option for users.
  RemoveMcTray	Removes the notification area.

• The following table details the parameters available for the EPsetup.exe file.

  Parameters	Description
  ADDLOCAL="fw,wc"	Identifies the modules to install: fw=Client Firewall wc=Web Protection
  override"hips"	Do not install Host Intrusion Prevention
  INSTALLDIR	Non-default installation location
  nocontentupdate	Tells the installer not to update content files automatically as part of the installation process. Dell recommends scheduling an update as soon as installation has completed.
  nopreservesettings	Do not save settings.

• The following table details the parameters available for the DellThreatProtection.msi file.

  Parameters	Description
  Reboot=ReallySuppress	Suppresses the reboot.
  ARP	0=No entry in Add/Remove Programs 1=Entry in Add/Remove Programs

  To install or upgrade, use the following workflow:

• Example Command Line

  \Threat Protection\EndPointSecurity

  The following example installs the Web Protection and Client Firewall with default parameters (silent mode, install Client Firewall, and Web Protection, override the Host Intrusion Prevention, no content update, no settings saved with logs in C:\ProgramData\Dell\Dell Data Protection).

  ".\Threat Protection\EndPointSecurity\EPsetup.exe" ADDLOCAL="fw,wc" /override"hips" /nocontentupdate /qb! /L*v"C:\ProgramData\Dell\Dell Data Protection\Installer Logs\"

  Then:

  \Threat Protection\ThreatProtection\WinXXR

• The following example installs the client with default parameters (suppress the reboot, no dialogue, no progress bar, no entry in the Control Panel Programs list).

  "Threat Protection\ThreatProtection\WinXXR\DellThreatProtection.msi" /qn REBOOT=ReallySuppress ARPSYSTEMCOMPONENT=1

  Then:

  \Threat Protection\SDK

• The following command line loads the certificate default parameters.

  "Threat Protection\SDK\EnsMgmtSdkInstaller.exe" -LoadCert >"C:\ProgramData\Dell\Dell Data Protection\Installer Logs\McAfeeSDKInstallerBeforeEndPoint.log"

  Then:

  \Threat Protection\SDK

• The following example installs the SDK.

  "Threat Protection\SDK\EnsMgmtSDKInstaller.exe" -InstallSDK -RemoveRightClick -RemoveMcTray >> "<OUTPUTDIRECTORY>\McAfeeSDKInstallerAfterEndPoint.log"