Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

To undo the DAC client configuration, enter the no client host command.

ipv4–addr

Enter the keyword ipv4–addr to specify the IPv4 address of the DAC.

ipv6–addr

Enter the keyword ipv6–addr to specify the IPv6 address of the DAC.

hostname

Enter the keyword hostname to enter the name of the host.

vrf vrf-name

Enter the keyword vrf followed by the name of the VRF to associate a VRF with the client.

key

(Optional) Enter the keyword key to specify an encryption key.

encryption-type

(Optional) Enter either 0 or 7 as the encryption type for the specified key. The options are:

• 0 – implies that the key is not encrypted and is stored as clear text.
• 7 – implies that the key is encrypted and hidden.

key

Enter a string that is the key to be exchanged between the switch and the dynamic authorization client. The key can be up to 42 characters long.

• CONF-DYNAMIC-AUTH

• It is possible to configure more than one dynamic authorization clients Duplicate (ipv4-addr or ipv6-addr or host-name) configurations are not allowed.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version

Description

9.14(1.0)

Introduced on the S4810 and S4820T.

9.13(0.0)

Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FM-IOM, and MXL.