Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

group-id

Displays the current configuration of all uplink-state groups or a specified group. The valid group-id values are from 1 to 16.

• EXEC
• EXEC Privilege

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

Version

Description

9.10.0.2

Introduced on the Z9100–ON.

9.8(2.0)

Introduced on the S3100 series.

9.10(0.0)

Introduced on the S3148.

9.8(0.0P5)

Introduced on the S4048-ON.

9.8(0.0P2)

Introduced on the S3048-ON.

9.2(1.0)

Introduced on the Z9500.

9.2(0.0)

Introduced on the M I/O Aggregator. This command is supported in Programmable-Mux (PMUX) mode only.

8.3.19.0

Introduced on the S4820T.

8.3.12.0

Introduced on the S4810.

8.4.2.3

Introduced on the S-Series S50.

DellEMC# show running-config uplink-state-group
!
no enable
uplink state track 1
downstream twentyFiveGigE 1/2,4,6,11-19
upstream FortyGigE 1/49, 29
upstream PortChannel 1
!
uplink state track 2
downstream twentyFiveGigE 1/1,3,5,7-10
upstream FortyGigE 1/49,42

• show uplink-state-group — displays the status information on a specified uplink-state group or all groups.
• uplink-state-group — creates an uplink-state group and enables the tracking of upstream links.