Dell EMC OpenManage Enterprise Version 3.2.1 User's Guide

Create customized device discovery job protocol for servers –Additional settings for discovery protocols

1. Select the Discover using WS-Man/Redfish (iDRAC, Server, and/or Chassis) check box to discover servers.
2. Enter username and password of the server to be detected.
3. In the Connection Settings section:
   1. In the Retries box, enter the number of repeated attempts that must be made to discover a server.
   2. In the Timeout box, enter the time after which a job must stop running.
   3. Enter in the Port box to edit the port number. By default, 443 is used to connect to the device. For supported port numbers, see Supported protocols and ports in OpenManage Enterprise.
      • Generate Trusted key: Disabled by default. Select to generate a trusted device key for communicating with devices.
        NOTE: First time, a user must generate the trust key by using the REST API, only after which this option can be used. This key is generated per device and enables a trust relationship with the managed device.
   4. Select the Enable Common Name (CN) check check box if the common name of device is same as the host name used to access the OpenManage Enterprise.
   5. Select the Enable Certificate Authority (CA) check check box.
4. Select one of the following check boxes to enable discovering by using these protocols. Enter the corresponding device credentials:
   • Enable SNMP: For discovering SNMP-compatible devices.
   • Enable RedFish: For discovering servers.
   • Enable IPMI: For discovering servers.
   • Discover using WS-Man/Redfish (iDRAC, Server, and/or Chassis) check box to discover servers.
   • Enable SSH: For discovering servers based on Linux, Windows, and Hyper-V.
   • Enable VMware: For discovering the ESXi hosts.
5. Click Finish.
6. Complete the tasks in Create a device discovery job.