Dell EMC OpenManage Enterprise Version 3.1 User's Guide

NOTE: To perform any tasks on OpenManage Enterprise, you must have necessary user privileges. See Role-based OpenManage Enterprise user privileges.

NOTE: If you have more than one IP for OpenManage Enterprise by using vNIC, you must use only the IPv4 address that is indicated in the Current IP Address field (click Application Settings > Current Settings) for accessing the REST API.

1. To only view the current network settings of OpenManage Enterprise such as DNS domain name, FQDN, and IPv4 and IPv6 settings, expand Current Settings.
2. To configure the OpenManage Enterprise current session timeout, expand Web Server Configuration and enter the session timeout duration in minutes.
   If the appliance is idle for the entered duration, the session is terminated. The current user is automatically logged out from the appliance.
3. The current system time and the source—local time zone or NTP server IP are displayed. To configure the system time zone, date, time, and NTP server synchronization, expand Time Configuration.
   1. Select the time zone from the drop-down list.
   2. Enter the date or click the Calendar icon to select the date.
   3. Enter the time in hh:mm:ss format.
   4. To synchronize with an NTP server, select the Use NTP check box, and enter the server address of the primary NTP server.
      You can configure up to three NTP servers in OpenManage Enterprise.

      NOTE: The Date and Time options are not available when the Use NTP option is selected.

   5. Click Apply.
   6. To reset the settings to default attributes, click Discard.
4. To configure the OpenManage Enterprise proxy settings, expand Proxy Configuration.
   1. Select the Enable HTTP Proxy Settings check box to configure the HTTP proxy, and then enter HTTP proxy address and HTTP port number.
   2. Select the Enable Proxy Authentication check box to enable proxy credentials, and then enter the username and password.
   3. Click Apply.
   4. To reset the settings to default attributes, click Discard.