Dell EMC OpenManage Enterprise Version 3.5 User's Guide

On the Configuration > Firmware/Driver Compliance page, the compliance status of the baselines is indicated. A Donut chart provides a summary of baselines' compliance to their respective catalogs. When more than one device is associated with a baseline, the status of the least compliant device to the baseline is indicated as the compliance level of that baseline. For example, the compliance level of a baseline with only one device with compliance as 'critical, is indicated as 'critical' even if most of the devices are compliant.

You can view the firmware and driver compliance of individual devices associated with a baseline and choose to either upgrade or downgrade the firmware and/or driver version on that device. To view the baseline compliance report:

• Select the check box corresponding to the baseline and click View Report in the right pane.

  On the Compliance Report page the list of devices associated with the baseline and their compliance level is displayed. By default, the devices in Critical and Warning statuses are displayed.

  NOTE If each device has its own status, the highest severity status is considered as the status of the group. For more information about Rollup Health status, see the MANAGING THE ROLLUP HEALTH STATUS BY USING IDRAC ON THE DELL EMC 14TH GENERATION AND LATER POWEREDGE SERVERS white paper on the Dell TechCenter.

• COMPLIANCE: Indicates the compliance level of a device to the baseline. For more information about symbols used for device firmware/driver compliance levels, see Manage the device firmware and drivers.

• TYPE: Type of device for which the compliance report is generated.
• DEVICE NAME/COMPONENTS: By default, the Service Tag of the device is displayed.
  1. To view information about components in the device, click the > symbol.

     A list of components and their compliance to the catalog is displayed.

     NOTE For all the devices (except the MX7000 chassis) which are fully in compliance with the associate firmware baseline, the > symbol is not displayed.

  2. Select one or more check boxes corresponding to the devices whose firmware compliance status is 'Critical' and requires an update.

  3. Click Make Compliant. See Update the device firmware version by using the baseline compliance report.

• SERVICE TAG: Click to view complete information about the device on the <device name> page. For more information about tasks you can complete on this page, see Viewing and configuring devices.

• REBOOT REQ: Indicates if the device must be restarted after updating the firmware.

• Info: Symbol corresponding to every device component is linked to the support site page from where the firmware/driver can be updated. Click to open the corresponding Driver Details page on the support site.

• CURRENT VERSION: Indicates the current firmware version of the device.

• BASELINE VERSION: Indicates the corresponding firmware and driver version of the device available in the associated catalog.

• To export the compliance report to an Excel file, select the check boxes corresponding to the device, and then select from Export.

• To go back to the Firmware page, click Return to Firmware.
• To sort data based on a column, click the column title.

• To search for a device in the table, click Advanced Filters, and select or enter data in the filter boxes. See Advanced Filters in OpenManage Enterprise Graphical User Interface overview.