Dell EMC OpenManage Enterprise 3.9 User's Guide

Import AD and LDAP groups

1. Click Import Directory Group.
2. In the Import Active Directory dialog box:
   1. From the Directory Source drop-down menu, select an AD or LDAP source that must be imported for adding groups. For adding directories, see Add or edit Active Directory groups to be used with Directory Services.
   2. Click Input Credentials.
   3. In the dialog box, type the username and password of the domain where the directory is saved. Use tool tips to enter the correct syntax.
   4. Click Finish.
3. In the Available Groups section:
   1. In the Find a Group box, enter the initial few letters of the group name available in the tested directory. All the groups names that begin with the entered text are listed under GROUP NAME.
   2. Select the check boxes corresponding to the groups be imported, and then click the >> or << buttons to add or remove the groups.
4. In the Groups to be Imported section:
   1. Select the check boxes of the groups, and then select a role from the Assign Group Role drop-down menu. For more information about the role-based access, see Role and scope-based access control in OpenManage Enterprise.
   2. Click Assign Role.
      The users in the group under the selected directory service are assigned with the selected user roles.
   3. For the Device Manager role, the scope is defaulted to All Devices, however, the administrator can restrict the scope by choosing the Assign Scope option followed by selecting the device group(s).
5. Repeat steps 3 and 4, if necessary.
6. Click Import.
   The directory groups are imported and displayed in the Users list. However, all users in those groups will log in to OpenManage Enterprise by using their domain username and credentials.