Dell Command Line Reference Guide for the S4048–ON System 9.14.2.8

To remove the shared key configuration, enter the no client-key command.

encryption-type:

(OPTIONAL) Enter either 0 or 7 as the encryption type for the key entered. The options are:

• 0 — is the default and means the key is not encrypted and stored as clear text.
• 7 — means that the key is encrypted and hidden.

key

Enter a string that is the key to be exchanged between the switch and RADIUS servers. It can be up to 42 characters long.

• CONF-DYNAMIC-AUTH

• Configure global shared key applicable for DA clients. If client configuration has shared key configured, that will take precedence.

This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide.

The following is a list of the Dell EMC Networking OS version history for this command.

Version

Description

9.14(1.0)

Introduced on the S4810 and S4820T.

9.13(0.0)

Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000, S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and MXL.