Installing iDRAC Service Module using VMware Update Manager
To install iSM using VMware Update Manager (VUM), complete the following steps:
Install VMware vSphere 6.5 or later versions—vCenter Server, vSphere Client, and VMware vSphere Update Manager—on a supported Microsoft Windows operating system.
On the desktop, double-click
VMware vSphere Client and log in to vCenter Server.
Right-click
vSphere Client host and click
New Datacenter.
Right-click
New Datacenter and click
Add Host. Provide information for the ESXi server as requested.
Right-click the
ESXi host added in
step 4 and click
Maintenance Mode.
From
Plug-ins, select
Manage Plug-ins > download VMware Update Manager. The status is enabled if the download is successful. Follow the instructions to install the VUM client.
Select the
ESXi host. Click
Update Manager > Admin view > Patch Repository > Import Patches and follow the online instructions to upload the patch successfully.
The offline bundle is displayed.
Click
Baselines and Groups.
Click
Create from Baselines tab, enter the baseline name, select
Host Extension as baseline type, and provide the requested information.
Click
Admin View.
Click
Add to Baseline against the uploaded patch name and select the baseline name that you created in step 8.
Click
Compliance view.
Select the
Update Manager tab.
Click
Attach and select the
Extension Baseline created in step 8 and follow the instructions.
Click
Scan, select
Patches and Extensions if not selected by default, and click
Scan.
Click
Stage, select created
Host Extension, and follow the instructions.
Click
Remediate and follow the instructions after the staging is completed.
iSM installation is complete.
For more information about VMWare Update Manager, see the VMWare website.