iDRAC9 with Lifecycle Controller Version 3.17.20.17 Release Notes

The online help of iDRAC web interface displays the Performance page. This feature is not supported on the systems supported by this release.

No action required.

Version/Systems affected: All systems supported by this release.

Dell tracking: 80612

The online help of iDRAC web interface for the System > Overview page displays information about features of Intel processors. The systems supported by this release only support AMD processors.

For information about the features of AMD processors, see the AMD documentation.

Version/Systems affected: All systems supported by this release.

Dell tracking: 81790

Although the ProcAts attribute is not supported in BIOS, you may be able to create a configuration job using WSMan. However, the job fails and returns an error message. This attribute is not visible in any of the interfaces or WSMan enumeration.

Do not use the ProcAts attribute because it is not supported in BIOS.

Version/Systems affected: All systems supported by this release.

Dell tracking: 78968

Incorrect slot names are displayed in LC logs when NVMe Disks are installed in the system.

[Date]   PR7   Dell NVMe PCIe SSD Configuration Data(Bay 3:Enclosure Internal 0-2)

Version/Systems affected: All systems supported by this release.

Dell tracking: 79270

If the system has a direct-attached NVMe SSD configuration, a dummy storage NVMe controller named PCIe SSD in Slot 1 in Bay 1 (PC) is listed in SNMP Walk/Get.

N/A

Version/Systems affected: All systems supported by this release.

Dell tracking: 80884

Under certain circumstances, the CapsLock may not function in Lifecycle Controller UI.

N/A

Version/Systems affected: All systems supported by this release.

Dell tracking: 80623

When you install a hot-pluggable NVMe drive in a backplane slot that has never been used before, the name of the backplane may not be displayed correctly.

Perform a complete power cycle of the server to perform a Collect System Inventory On Reboot (CSIOR). This process refreshes the inventory and the correct names are displayed.

Version/Systems affected: All systems supported by this release.

Dell tracking: 84224

If Auto Config Domain Name is enabled and you try to disable the System Lockdown mode using iDRAC HII (F2 at POST > iDRAC Settings), an error message is displayed.

The error can be ignored. If you click OK on the error message box, System Lockdown mode is disabled.

Version/Systems affected: All systems supported by this release.

Dell tracking: 85679

If you have a network card with some 10G or faster ports and some 1G ports, Family Driver Version may not display the correct version or may display Unavailable.

Use operating system tools or OMSA to view the driver version.

Version/Systems affected: All systems supported by this release.

Dell tracking: 87441

You cannot update the firmware for SEP Backplane using a catalog.

For updating the firmware for SEP Backplane, use a single DUP.

Version/Systems affected: All systems supported by this release.

Dell tracking: 79654