Inspiron 13 5000 2-in-1 Service Manual

Procedure

1. Peel the tape that secures the display cable and touch-screen board-cable to the system board.
2. Peel the tape that secures the I/O-board cable to the system board.

   

   1. I/O-board cable
   2. display cable
   3. tape (3)
   4. touch-screen cable
   5. system board

3. Open the latches to disconnect the display cable and the touch-screen board-cable from the system board.
4. Open the latch to disconnect the I/O-board cable from the system board.
5. Disconnect the power-adapter cable and the speaker cable from the system board.
6. Open the latch and disconnect the keyboard daughter-board cable from the system board.
7. Disconnect the hard-drive cable from the system board.

   

   1. display cable
   2. touch-screen cable
   3. tape
   4. power adapter port-cable
   5. speaker cable
   6. latch
   7. keyboard daughter-board cable
   8. hard-drive cable
   9. I/O-board cable
   10. tape

8. Remove the three screws (M2x2 Big Head) that secure the system board to the palm-rest assembly.
9. Lift the system board off the palm-rest assembly.

   

   1. screws (3)
   2. system board
   3. palm-rest assembly