Inspiron 16 7610 Service Manual for computers with three fans

Screw list

NOTE When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Secured to	Screw type	Quantity	Screw image
Base cover	Palm-rest and keyboard assembly	M2x4	7
Base cover	Palm-rest and keyboard assembly	M2x8.5 (captive)	2
Battery	Palm-rest and keyboard assembly	M2x3	5
Solid-state drive	Palm-rest and keyboard assembly	M2x3	1 per solid-state drive
Left fan	Palm-rest and keyboard assembly	M2x5	2
Right fan	Palm-rest and keyboard assembly	M2x5 M2x5	2
Wireless card	System board	M2x3	1
Touchpad	Palm-rest and keyboard assembly	M2x2	2
Touchpad bracket	Palm-rest and keyboard assembly	M2x2	2
Power-button with optional fingerprint reader	Palm-rest and keyboard assembly	M2x3	1
Type-C port bracket	System board	M2x5	2
Display hinges	Palm-rest and keyboard assembly	M2.5x5	6
Power-button board	Palm-rest and keyboard assembly	M2x3	1
I/O board	Palm-rest and keyboard assembly	M2x3	2
System board	Palm-rest and keyboard assembly	M2x2	1
System board	Palm-rest and keyboard assembly	M2x3	2