Inspiron 3671 Service Manual

Procedure

1. Disconnect the optical-drive data cable and power cable from the optical-drive assembly.
2. Remove the two screws (M2x2) that secure the optical-drive assembly to the chassis.
3. Slide and remove the optical-drive assembly from its slot on the chassis.
   
4. Insert a pin into the optical-drive emergency eject pinhole to release the optical-drive tray.
5. Gently pull to open the optical-drive tray from the optical-drive assembly.
   
6. Using a plastic scribe, push the tabs to release the optical-drive bezel from the optical drive.
7. Gently pull and disconnect the optical-drive bezel from the optical drive.